Through nearly twenty years of improvement on the basis of digesting the imported equipment, this product has been a mill with long use, low energy consumption and high efficiency compared with same type product, it has the advantages of less electricity power consumption, large crush capability, wide suitability, compact structure long trouble-free operation and easy cleaning, etc..

This machine can crush various material and is widely used for organic chemical, inorganic chemical, food, inorganic chemical and medical industries.

For many years, we have been supplying customers with high quality products、excellent after-sales service and timely spare parts and have achieved scope for expanding the market.

2. Introduction of structure

  There are four rotor positions for this eddy mill that can be put in 3 ~ 4 rotors. Each rotor consists of fourteen blades and two splints to form fourteen crushing chambers. After material is sent into the crushing chamber by imported high-speed distributor, the high-speed revolving rotors can make air generate countless ultrasonic eddy current and high-frequency pressure produced by the eddy current, which causes force vibration to crush material. Material is transferred from the first stage to the second stage and then the third stage, making nearly 90% material has the fineness of 80 ~ 100 mesh. If four rotors are mounted, the fineness of brittle material can reach 2μm, and the material that is even emplastic or elastic material also can be processed. In addition, the temperature of material rises very little during operation, which is quite advantageous for crushing heat sensitive raw materials of chemical industry.

1.     Process flow and equipment configuration

  Process flow: constant material is fed to mill evenly through feeder. The removed mixture of material and air is transmitted into cyclone separator, and the material is separated from air, then tail gas enters dust collector for secondary separation to remove air.

In order to improve crushing efficiency, it is of vital importance to select proper material feeder, separator and dust collector. Our configuration of vibrating material feeder and rotary disc material feeder are well applicable. We also produce auxiliary equipment made of stainless cyclone separator and bag dust collector for customer’s choice.

The particle size of feeding feed-in material should be controlled at 2 ~ 10mm generally. If the particle size of the material that needs to be crushed is beyond the pale of 2 ~ 10mm, additional primary crushing equipment is recommended.

2.     Technical parameter