Product Description
CT11GC3C gives you both a reduced phone bill and a convenient phone conversation!
- Conversion of wire & wireless communication
- Auto-select economic route (LCR)
- With LCD display for easy programming
- Code Conversion Setting: Through the connection towards local PSTN line, the phone calls will proceed with code-transfer dialing process
- Volume modulating setting (1 - 5)
- Polarity reversing function and 12 KHz built in
- Definition of DTMF reversing signal
- Limit of communicating time
- GSM function of dialing out the prompt voice
- When not connecting to Telephone Office line, GSM will provide the forced dial-out function
- Set up GSM extra dialing local code
- Set up extra dialing local-code to PSTN
- GSM isn't ready, call will be forced to dial out from PSTN
- Setting of Dialing type Call-Transfer:
PSTN TO GSM, GSM TO PSTN, GSM call-
Transfer setting time to PSTN out, DTMF definition of reversed signal
- GSM Frequency bands: Dual Band
EGSM 900 and DCS 1800 MHz
GSM 850/900/1800/1900 MHz (optional)
- Specific Call Transfer setting:
GSM to PSTN: Assign mode (one stage dialing)
Free mode (two stage dialing)
PSTN to GSM: An Incoming call will be transferred to specify GSM Number
- Call Transfer Restriction Setting (10 sets)
- Short Code Setting (100 sets)
- GSM Prefix No Setting (30 sets)
- Support Call ID Dual Mode (FSK + DTMF)
- Siemens TC-35 GSM Module
- SIM Card Pin code disable/enable