Product Description
Product Description
CAN Bus Isolated Introduction
The Series CAN Bus Isolated Repeater utilizes automatic bidirectional switching requiring no control signal. This product can insulate CAN bus for a distance up to 10Km. This product enables equipment connections to the bus to be doubled. All upper levels protocol is supported.
The Series CAN Bus Isolated Repeater can be widely used, such as Industrial Controls, Intelligent Transportation Systems (ITS), Industrial Networking, Supervisory Control and Data (SCADA) and so on.
| ELECTRICAL |
| Isolation |
3000Vsm |
| Lightning/Surge Protection |
1~2 lightning strikes |
| ESD Protection |
15KV |
| CAN BUS |
| Connector Type |
Terminal |
| Data Rate |
DC -1.2Mbps |
| Extended Distance |
10Km |
| GENERAL |
| Operating Temperature |
-40 ~ 70C / -40 ~ +158F |
| Operating Humidity |
0 ~ 95% non-condensing |
| Mean Time Between Failure (MTBF) |
> 70, 000hrs |
| Power Supply Input Voltage |
9~18V DC |
| Power Supply Output Voltage |
5V DC |
| Dimensions (H × L× W) |
80mm× 60mm× 23mm/3.15” × 2.36” × |