Product Description
G30 GSM Power Facility Alarm Host is one of the GSM Power Facility Alarm System.
Its Specification and Function is as follow:
Function
·Apply to the security of 10KV power electric transformer, power electric transmit line and street lamp line.
·Monitor 3 phase loss voltage and single phase failure of the distribute power electric network.
·Equip 8 routes of wired input alarm.
·Support several groups of SMS alarm and auto-dialed alarm, as well as drive wiretap to locate monitor.
·One host could deal with the alarm signal from three transformers at the same time.
·Connect with PATROL HAWK PH-BC 110 alarm center.
·Case shell(Sealed auminum die-casting): waterproof, anticorrosion, fireproof, strike preventing
Specification
·GSM 900/1800MHz or 850/1900MHz double frequency module inside
·Alarm mode: SMS and auto-dialed.
·Monitor Voltage: AC 380V +10%
·Alarm respond time: less than 8s (GSM is in normality)
·Valet power consumption: less than 0.6W
·Siren Vulume: more than 110db
·Connection of three-phase and four line (Y)
Standard working voltage of signal phase: AC220V
The lowest working voltage of signal phase: AC110V
The highest working voltage of signal phase: AC270V
·Backup battery: DC12V/1.2AH (Lead-Acid standard)
DC12V/1AH (Ni-MH) Optional
Alarm Voltage: DC10.5V
·Resisting electromagnetic interference: IEC55022
·Insulating level: Grade B
·Protection Level: IP55
·Temperature: -30 to +55 ℃
·Humidity: less than 95%
·Case shell: Aluminum die-casting, sealed
·Dimension: 240mm(Long) ×170mm(Wide) ×115mm(High)