Our mill has been developing and producing special alloy for high performance applications.
　 Based on the rich experience in technology and management over 30 years, our mill integrating R&D, trade and manufacture, has advanced manufacturing equipments, rigid management system and normative quality control process.

Iron based alloy has the function of good wear resistance, high temperature resistance, anti-oxidation and thermal shock resistance, high hardness and strength in normal and high temperatures, excellent oxidation resistant to deoxygenize corrosion of compound medium, corrosion of high temperature gas, corrosion of chloride,corrosion of strong deoxygenize medium. Mainly used it on manufacture, repair and pre-protection of all kinds of spare parts that are anti-oxidation, corrosion resistance, impact and strong wear in the fields of agriculture, chemical industry, metallurgy, mining and other industries.

Data Sheet:

Cobalt base alloys (Co-based)

Cobalt-based Alloy has good hardness of high and normal temperature, excellent high-temperature intensity, anti-fatigue properties in high-temperature, thermal shock resistance and good performance of the impact of anti-oxidation and corrosion resistance, with the properties of high wear resistance of wear tablet and the good anti-intermetallic wear.

Cobalt-based super alloys are non-ferrous magnetic alloys with high strength and toughness, excellent corrosion and oxidation resistance, and high temperature strength – all key qualities for a 'superalloy', In addition, cobalt can also be magnetized, which adds to its potential uses. Cobalt's properties result in the use of Cobalt-based superalloys in jet engine components, prosthetic devices, magnets, and cutting tool binders. Cobalt is a useful alloying element in tool, maraging, and other alloy steels.

Mainly used its wear resistance, corrosion resistance, high temperature resistance, impact resistance in the manufacture, repair and pre-protection of all kinds spare parts under the mining conditions.

 Data Sheet:

Copper base alloys (Cu-based)

The basic properties of copper alloys are largely influenced by the properties of copper itself. Copper is known to possess certain unique qualities that make it the best engineering material for bearing applications.

These are:

• High thermal conductivity
• Excellent ductility and toughness over a wide range of temperatures
• Excellent corrosion resistance in many different environments

 Data Sheet:

Name	Int. standard	ASTM Standard	Bristish Standard	DIN standard	UNS
Cu-based	C70600/90Cu10Ni/B10	B402/466/111/395/171/151B4	CN 102	2.0872
	C71500/70Cu30Ni/B30	B402/466/111/395/171/151	CN 107;	2.0872
	C18100/Cu-Cr-Zr-Mg	C18100
	C96400	C96400

Nickel base alloys (Ni-based)

Nickel and nickel-base alloys are vitally important to modern industry because of their ability to withstand a wide variety of severe operating conditions involving corrosive environments, high temperatures, high stresses, and combinations of these factors.

There are several reasons for these capabilities. Pure nickel is ductile and tough because it possesses a face-centered cube crystal structure up to its melting point. Nickel has good resistance to corrosion in the normal atmosphere, in natural freshwaters and in deaerated non-oxidizing acids, and it has excellent resistance to corrosion by caustic alkalis.

Therefore, nickel offers very useful corrosion resistance itself and provides an excellent base for developing specialized alloys. Intermetallic phases can be formed between nickel and some of its alloying element: this enables the formulation of very high strength alloys for both low- and high-temperature service.

 Data Sheet:

Name	Int. standard	ASTM Standard	Bristish Standard	DIN standard	UNS
Pure Nickel	Nickel 200	ASTM B160/161/162/163	NA 11	2.4066	N02200
	Nickel 201	B160/161/162/163	NA 12	2.4068	N02201
Monel Alloy	Monel 30C	ASTM A494
	Monel 400	ASTM B127/163/164/165	NA 13	2.4360	N04400
	Monel R405	ASTM B164
	Monel K500	B8651 SAE AMS 4676E	NA 18	2.4375	N05500
Inconel	Inconel 600	ASTM  B163/166/168		2.4816	N06600
	Inconel 625/625LCF	ASTM B443/444/446/564		2.4856	N06625
	Inconel 690	UNS NO6690		2.4642	N06690
	Inconel 718	B637/AMS 5662/AMS5663		2.4668	N07718
	Inconel X750	B637		2.4669	N07750
	6021
Incoloy	Incoloy 800	B163/B407/B408/B409	NA 15	1.4876	N08800
	Incoloy 800H	B409/B407/B163/B408		1.4558	N08810
	Incoloy 800HT				N08811
	Incoloy 825	B425/163/423/424	NA 16	2.4858	N08825
	Carpenter20/20cb	B463/464		2.4660	N08020
Hastelloy	Hastelloy B				N10001
	Hastelloy B-2	B333/622		2.4617	N10665
	Hastelloy C-4	B575/622/574		2.4610	N06455
	Hastelloy C-22	B575/B622/B574		2.4602	N06022
	Hastelloy C-276	B619/622/575/574		2.4819	N10276
	Hastelloy G-3	B582/622/581
	Hastelloy G-30				N06030
	Illium B

  Product Reference Guide:

Round Bar	Billet	Plate	Blanks & Rings	Step-down Forge	Machined Components

© PipeFitting.Asia | E-mail:  pfAsia8@gmail.com