Cold Paint (Solvent, Water Based) Dual Purpose Road Marking Machine is optional for special transport trailer, which is convenient for transportation, and is optional for hand-push machine to apply crossings, parking line and dividing lines.
1. Engine: 31Kw water-cooled electric- startup diesel engine with four - cylinder inline, low noise and environment protection has indication of water temperature, voltage and engine oil. Fuel tank`s cubage: 60L.
2. Driving system: The original imported variable speed transmission system with automatic brake device. Flexible operated in forward, back off or stop (HTS).
3. Driving speed: Forward: 0-22km/h; back off: 0-12km/h; Max climbing capacity: 20°.
4. Paint pump: Equipped with double hydraulic driven plunger pump. Max flow of single pump: 20L/min. Max spraying pressure: 20Mpa.
5. Paint tank: Double tanks, capacity of each one: 500kg. Equipped with hydraulic driven vertical vane type stirrer. There is sieve device in the discharge port.
6. Spray gun: Equipped with four new type pneumatic spray guns and lengthening-pipe hand spray gun ,with hard side columnar reverse wastewater nozzles (30/20, 70-20), which make the site discharging fast and easy. Non-arc nozzle makes the line straight. Start four guns at the same time if construction needs. Spraying width: 100-1000mm.
7. Available paint: for the spraying of cold solvent and water based road marking paint.
8. Glass beads spraying system: Option for single or double spray guns if construction needs. Displacement of air compressor: 0. 6m3/min.
9. Glass beads bin: Single or double bins with windows can check the quantity of glass beads in time, which makes sure continuous spraying of glass beads. Capacity of each bin: 150kg.
10. Chassis: Firm welding frame, four wheel structure. The wheels are all gas filled abrasion resistance wheels. Diameter: 630mm. Operator sit on the chair to operate through hydraulic strengthen steering wheel (equipped in left or right according to the needs of customer), easy and freely. Stable brake system makes the driving safer.
11. Control system: Equipped with PLC micro - electronic control system. which can freely set the line type of single actual line, double - actual line and other broken line. According to the needs of customer, option for the measure device for consumption of paint, total length and total square and thickness which make the spraying work convenient and fast.
12. Gun bracket: Foldable bracket is equal distance to road surface. Spray width freely adjust before or after construction work.
13. Pre-marker system: Synchronous with pre-marker working, greatly improves the construction efficiency.
14. Size and Weight: 5200mm (length)*1880mm (width)*1650mm (height) and 2050kg.

Road Marking Machines include Cold Solvent Road Marking Machine, Thermoplastic Road Marking Machine and Two-Component Road Marking Machine.