Introduction

The CO-8000F-S series standalone DVR is new generation digital surveillance product, utilizing cutting-edge H.264 DSP compression technology. They use a real-time OS and embedded MCU. Featured with full D1 resolution, the CO-8000F-S series standalone DVR can work as a stand-alone system or be used to build powerful networks, which are widely used in banks, telecommunication, transportation, factories, warehouse, and other large-scale security applications that need high image quality.

Models

CO-8008F-S: 8-ch video & audio input, 200 F/S (PAL) or 240F/S (NTSC), full 4CIF, support maximum 8 SATA HDD
CO-8016F-S: 16-ch video & audio input, 400 F/S (PAL) or 480F/S (NTSC), full 4CIF, support maximum 8 SATA HDD

Note: The standalone DVR DO NOT equip with HDD and CD-R/W by default.

Features

CO-8000F-S series standalone DVR adopts real-time multi-tasking operating system (RTOS) and embedded MCU, to perfectly implement all the functions needed to build a powerful surveillance system. Running all the software on a FLASH makes the system more steady and reliable.

Compression function

• Each video channel can be compressed independently in 25F/S (PAL) or 30F/S (NTSC). Both variable bit-rate and variable frame rate are supported
• Each audio channel can be compressed independently, using an OggVorbis audio standard. The output bit-rate is 16 kbps
• The output video and audio streams are integrated to generate the synchronized H.264 stream. Video and audio coincide with each other from beginning to end when the stream is played back
• Supports following resolutions:
  NTSC:4CIF(704x480),DCIF(528x320),2CIF(704x240),CIF(352x240), QCIF(176x120)
  PAL:4CIF (704x576), DCIF(528x384), 2CIF(704x288),CIF(352x288), QCIF(176x144)
• Supports dual-stream mode, and the sub-stream can support CIF/QCIF compression resolution
• Supports multi-zone motion detection
• Supports position configurable OSD & LOGO
• Supports watermark

Network function

• Supports TCP/IP (ARP, RARP, IP, ODP, TCP, PPP, PPPoE, DHCP, SNMP, etc)
• Supports broad-band transmission (ADSL, etc)
• Supports narrow-band transmission (PSTN, etc)
• Streams of one or more channels, standalone DVR's running state and alarm state can be accessed through network
• Standalone DVR's parameters can be set through the network
• Supports remote control of PTZ
• Streams can be recorded in a remote host PC
• Files in Standalone DVR can be downloaded or playbacked in remote host PC
• Supports remote upgrading
• PC hosts can gain direct control of Standalone DVR through RS-232 or RS-485 port
• Supports voice talk between hosts in surveillance center (back end) and Standalone DVR (front end)
• Supports embedded web server. Browser can be used to access standalone DVR

Storage function

• Supports 6 kinds of record trigger mode: Schedule mode, alarm mode, motion detection, motion detection & alarm, motion detection or alarm
• Supports 8 SATA HDDs
• Supports HDD sleep mode
• Supports HDD S.M.A.R.T function
• Supports FAT32 file system
• Supports USB flash disk, USB hard disk and USB CD-R/W for backup

Preview & Playback function

• Supports monitor and VGA output
• Support one spot monitor for preview and playback.
• Supports 2-channel synchronous playback
• Supports partial zone sheltering
• Supports local file Play and time slider bar play, support play fast, play slow, pause, play frame one by one, etc
• Supports OSD, LOGO

PTZ control

• Supports Pan-Tilt-Zoom control
• Supports most popular PTZ protocol
• Ability to customize new PTZ protocol

Others

• Supports view tampering alarm function for spiteful camera block
• Supports video signal loss alarm function
• Automatically recovery from exceptions
• Provides full SDK and demo source code to shorten the application development time

With H.264 technology, users will experience the following benefits:

• Up to 40% higher image quality
• Over 60% savings on recording storage space
• Truly "Live" performance despite variations in network transmission conditions